How to Troubleshoot a Stop 0xC0000218 Error

This behavior can occur if a necessary registry hive file cannot be loaded because the file is corrupted or missing. Registry files can be damaged because of hard disk corruption or some other hardware problem.

This behavior can also occur if the driver has damaged the registry data while loading into memory, or if the memory where the registry is loading has a parity error. In the latter case, turn off the external cache and check the memory chips. This post provides technical support to fix 0xC0000218 Error.

To resolve this error, complete the following troubleshooting steps until the error no longer occurs:

1. Attempt to start the computer by using the "Load Last Known Good" configuration. To do this, when Windows loads, press the SPACEBAR when the Load Last Known Good message appears.
2. Restore the registry files by using Recovery Console.For additional information about how to restore the files by using Recovery Console, click the article number below to view How to Recover from a Corrupted Registry
You may need to change the boot order in the basic input/output system (BIOS) in order to boot from the CD and launch the Recovery Console. For additional information, click the article number below to view the HOW TO: Install and Use the Recovery Console for Windows XP
3. You may need to change the boot order in the basic input/output system (BIOS) in order to boot from the CD and launch the Recovery Console. Complete a parallel installation, and restore the registry files from a tape backup.
1. Reinstall Windows into a separate folder.
2. Restore the registry hives that are found in the %SystemRoot%\System32\Config folder.
3. If you do not have a tape backup, contact your administrator. The backup of network servers and production workstations is included as a critical part of running any production system.
NOTE: If Windows is stored on a partition formatted with the FAT file system, you can restore the files by using files from another computer and copying the registry hive files into the Windows folder.

4. You may need to change the boot order in the basic input/output system (BIOS) in order to boot from the CD and launch the Recovery Console. If the Stop error message is caused by a hardware problem (for example, bad sectors on the hard drive), the drive might require low-level formatting, repartitioning, reformatting, and a restoration of the entire system from a tape backup to clear up the error. If the Stop error is caused by a physically bad sector, you must use low-level formatting to relocate the bad sector even though this is a drastic solution.

Read rest of entry

Computer Reapir Services To Fix Computer Problems

Computer users all around the world require technical support to get rid of their computer related issues. Technical support is basically a term given to the collection of services, which offers solution to the computer related technical issues.

Technical support can be provided either online or on-site. Online computer support is more beneficial when compared to on-site support due to many reasons. The main reason is the availability; you can acquire online technical support irrespective of your location, but this is not possible with on-site support.

With online tech support, you get perfect assistance for:
• Installation, re-installation of software
• Troubleshooting
• Configuring settings for Internet, e-mail, Office suite
• Windows updates
• Virus removal
• Installation of antivirus, antispyware
• PC optimization
• Data recovery

Online technical support requires Internet connection with your system. A technician from your service provider can access your system through remote connection after getting your permission. After accessing your system, that technician will diagnose your system in order to resolve your issue. At last, technician will perform the required task and your issue gets resolved.

So, would be better to say that technical support makes your PC fit and healthy, so that it can work according to your expectations.

Read rest of entry

Install Printer

Printer is a peripheral device, which is capable of producing hard copy of the documents stored in electronic form. Sometimes, you have to utilize a remote printer, in case you do not have a local printer. For utilizing a remote printer, you have to install its driver on your computer system.

Follow these steps for installation of a printer driver on a Microsoft Windows XP based computer:


STEP 1: Click Start->Control Panel ->Printers and Other Hardware -> Printers and Faxes

STEP 2: Double-click Add Printer to start the Add Printer Wizard, and then click Next

STEP 3: Click Local printer, clear the Automatically detect and install check box, and then click Next

STEP 4: Click Create a new port, and then click Local Port in the Port type section

STEP 5: In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the name of the printer:\\server\printer

STEP 6: Click Next, and then select a Windows XP driver for your printer

STEP 7: Click Next, and then follow the instructions to finish the wizard

Follow these steps for installation of a printer driver on a Windows 2000-based computer:

STEP 1: Click Start, point to Settings, and then click Printers

STEP 2: Double-click Add Printer to start the Add Printer Wizard

STEP 3: Click My Computer, and then click Next

STEP 4: Click Add Port, click Local Port, and then click New Port

STEP 5: In the Port Name box, type the path to the printer in the following format, where server is the name of the print server and printer is the name of the printer:

\\server\printer

STEP 6: Click OK, and then click Close.

You can install printer driver for a remotely located printer on a Windows 2000-based computer and later versions.

Read rest of entry

Technical support

Technical Support Service is set up to provide technical service to our licensed customers in the Australia. We understand that our customer's success may depend on how effectively you can put your technology to work so it is therefore our mission to empower our customers to achieve their business goals by providing the highest level of Technical Support.
In order to react to your enquiry regarding a General Business Technical Support Query or if you are unable to locate the information you need, our Technical Support team is available 7 days a week.
We all know that connecting to the Internet can provide occasional issues. As part of our commitment to our customers
Computer technical support is the range of services offering help with PC related issues. There are numerous organizations that offer technical support
We are offering many services to our customers, like:
1. Troubleshooting hardware device.
2. Network connectivity checkup.
3. Proper error assignment etc.
And other services by iYogi technical experts.

Read rest of entry